Browse all practice questions for the Tennessee Law Enforcement Training Academy (TLETA) Week 10 Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Ace the 2026 TLETA Week 10 Challenge – Step Up to Tennessee Law Enforcement Excellence! course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • To charge someone with TCA 39-13-213, vehicular homicide, probable cause of the reckless killing of another by the operation of an automobile or any other motor vehicle, as the result of
  • Patent prints are visible before processing or enhanced.
  • Dying Declaration is defined as which of the following?
  • When securing the perimeter of a crime scene, how big should it be?
  • Double locking handcuffs when?
  • The main purpose of tire tread is to
  • What is the transfer concept?
  • What are the three types of friction?
  • In a turn, the apex is described as
  • Which term describes the tendency to resist changes in motion?
  • Which of the following is NOT an active occupant protection device?
  • Which option is NOT part of the basic elements of gun safety as described?
  • What are major case prints?
  • What should you never do when driving at night in reference to your headlights?
  • Which statement describes inertia?
  • Which item is an example of a passive occupant protection device?
  • Which statement correctly distinguishes cover from concealment?
  • In the typical pressure points sequence, which is the third step?
  • What are the three parts of a turn?
  • Which of the following describes hollow point bullets' purpose?
  • Which statement accurately describes patent prints?
  • Which of the following is listed as a pressure point on the head and neck area?
  • Which of the following statements about occupant protection devices is true?
  • When are fingerprints formed?
  • What is a passive occupant Protection device?
  • Which braking system is described as an automated braking system?
  • Which statement describes patent prints?
  • Which statement accurately reflects the material's guidance on tangible reference points at crash scenes?
  • What are the four types of skids?
  • How many officers should be present when searching a building?
  • Which law corresponds to the statement 'For every action there is a reaction'?
  • Where should gun be held when room clearing?
  • Which force acts toward the center in circular motion?
  • Which option is not one of the three recognized types of prints?
  • What is the third law of motion?
  • How Acceleration described within laws of motion?
  • What is a safe driver?
  • Threshold braking is associated with which braking method?
  • Which option lists all the examples of temporary evidence as described?
  • What distance threshold is used in the shootout statistics?
  • In a two-vehicle central collision, which statement best describes the impact?
  • What is mental stunning?
  • Which statement about the timing of officer-involved shootings is true?
  • Which of the following is an intermediate weapon within levels of control?
  • Regarding sight picture, which statement is correct?
  • Which type of friction occurs when surfaces slide past one another?
  • How does a gouge differ from a scrape?
  • Which of the following best describes gun shot residue?
  • Defensive driving emphasizes space management to maintain what?
  • Which TCA outlines the Vanessa K Free Act and what is required under this act?
  • What is the recommended guidance for headlights in night driving?
  • A tire mark left from a tire that is not rotating and has parallel striations is called a
  • Rolling friction is defined as?
  • One step of sight picture/sight alignment is described as: The tip of the front sight is level with the top of the rear sight and equally spaced from left to right.
  • In Newton's laws of motion, how is action related to reaction?
  • What are the three components of defensive driving?
  • What should be used to process paper for the presence of latent prints?
  • Acceleration and deceleration should always be
  • Which term describes a non-central collision between two vehicles?
  • What is included as temporary evidence in a crash investigation?
  • Over 60% of officer-involved shootings occur between which hours?
  • Which statement best defines inertia?
  • What is an efficient driver?
  • How many seconds does it take to redirect the vehicle?
  • How should acceleration and braking be performed?
  • How did law enforcement officers transition from revolvers to semi-automatic pistols in terms of capacity?
  • What is the purpose of hollow point bullets?
  • Which strategy reduces resistance by causing discomfort?
  • What are skid marks?
  • In a room clearing operation, which member is primarily responsible for directing the suspect verbally?
  • What are the three collisions in a crash?
  • What are examples of tangible reference points?
  • What is the cover officers job in a room clearing situation?
  • How should you turn corners when room clearing?
  • First step in applying pressure points
  • What are the two steering methods?
  • When are fingerprints formed, in terms of birth timing?
  • What is balance displacement?
  • What is a fatal funnel?
  • Who shares the responsibility for range safety?
  • Threshold braking is best described as?
  • Which statement about dying declarations is accurate under hearsay rules?
  • By what factor does stopping distance increase when speed is doubled?
  • Which statement accurately describes latent prints?
  • Which statement about officer-involved shooting timing is true?
  • Which description matches balance displacement?
  • Which statement is true about defensive driving?
  • Static friction is defined as the force exerted between two surfaces by weight alone, standing still (most difficult).
  • Which statement about dying declarations is accurate?
  • Something on a surface has to be measured with ______ measurements.
  • Which is a control principle?
  • What is the most common pistol malfunction?
  • Which statement best captures the importance of proper crime scene response?
  • What is stealth movement?
  • For each piece being measured you have to have ______ measurements.
  • What describes the relationship between momentum and force according to the laws of motion?
  • Latent print processing on paper commonly uses which chemical?
  • Which option lists the factors that make up max energy transfer for a strike?
  • The objective reasonableness standard is assessed from the perspective of which of the following?
  • What is the effect of cover in a defensive scenario?
  • Which statement correctly describes typical ammunition capacity differences between revolvers and semiautomatic pistols?
  • Which safety practice is essential before firing?
  • Which scenario best describes defensive driving practice?
  • Which description matches that you should search from bottom to top in a room clearing?
  • What should you use when you encounter resistance while handcuffing?
  • Which of the following is NOT listed as a mental factor affecting driving?
  • Which of the following lists the three forces controlled by the driver?
  • Latent prints are prints that are not visible without processing.
  • What is action/reaction?
  • Of the shootings that occur within 21 feet, what percent occur within 5 feet or less?
  • Reference points must be ________.
  • A semi-automatic pistol uses which device to feed ammunition?
  • What should guide all measurement work?
  • Occupant Protection devices can be
  • When using deadly force, the threat must be so great that it doesn't matter if the person is killed
  • What is the contact officers job in a room clearing situation?
  • ________% of shootouts occur outside 21 feet.
  • How many shots should you fire in a deadly force situation?
  • What are the three types of people we handcuff?
  • If velocity remains constant and mass doubles, momentum changes by what factor?
  • What is concealment?
  • How should you search in a room clearing situation?
  • What is the Total Control Theory?
  • What are the basic elements to gun safety?
  • Which of the following is a listed level of resistance?
  • If a vehicle has mass m and velocity v, its momentum is mv. If mass doubles while velocity remains constant, momentum will
  • How many seconds does it take to perceive a hazard?
  • Which of the following is NOT listed as a fundamental of marksmanship?
  • What windshield damage pattern describes a circular spider-like pattern observed during inspection?
  • In low light, how many shootings happen?
  • Which term describes something that defeats a round?
  • Which print type is visible to the naked eye without processing?
  • When drawing a field sketch you should
  • Centripetal force is defined as the force that acts on a body moving in a circular motion and is directed toward the center.
  • What defines a tactical reload?
  • What are your two reactionary tactical options when faced with resistance?
  • In a deadly force situation, which statement describes the appropriate action?
  • Which pressure point is on the lower leg/foot?
  • What are the two most important variables in disarming?
  • Which statement about dying declarations in hearsay law is correct?
  • When should you brake?
  • What are the basic elements of gun safety?
  • What is a reference point?
  • Which of the following is a fundamental of marksmanship?
  • Which of the following is NOT a pressure point on the head and neck area?
  • What is cover?
  • What are the four types of skids?
  • In crime scene photography, which factor most affects image detail?
  • Which part of the curve is defined as the point of maximum turn?
  • The rule that something on a surface has to be measured with three measurements applies to:
  • Which type of print is an impression left in a soft material?
  • In a criminal crash investigation you should
  • Centrifugal force is described as
  • The objective reasonableness test is used to determine
  • What is the Tennessee Code Annotated (TCA) section number for deadly force?
  • Which statement about the admissibility of a dying declaration is true?
  • Which gun angle is considered correct during room clearing?
  • What is a button hook room entry?
  • Which Tennessee Code Annotated outlines operational audio and visual emergency equipment?
  • What are distraction techniques?
  • Which type of friction acts when surfaces are at rest relative to each other?
  • What are the two main causes of firearm accidents?
  • Which statement about latent prints is accurate?
  • What is your nighttime reaction time while driving?
  • How is momentum defined?
  • Knee strikes are described as which type of tactic?
  • During handcuffing, which method is used to take down a resistant subject?
  • What is your daytime reaction time while driving?
  • Which term describes windshield damage caused by impact?
  • What are the three parts of the curve?
  • Defensive driving is best described as
  • When using conventional, what type of braking method should you use?
  • Which of the following is a type of skid?
  • Which rule emphasizes muzzle direction and avoiding hazards?
  • What is centrifugal force?
  • In a crash, which is NOT one of the three collisions?
  • Which of the following is NOT a component of the field strip components as listed?
  • What are the 2 types of braking systems?
  • Which option correctly represents the daytime reaction time value?
  • Which is the pressure point located on the inside of the thigh?
  • During a tactical reload, which statement is true?
  • Which is described as the most detrimental thing for shooters?
  • In a crisscross entry, which arrangement best describes the team?
  • What is a professional driver?
  • What is the difference between gouge and a scrape?
  • A professional driver is defined as
  • What are the three forces controlled by the driver?
  • Which statement is true about the objective reasonableness assessment?
  • What is the force that must be overcome when two bodies in contact move?
  • Does an active safety device require your action?
  • Which statement matches the acceleration concept?
  • What is the purpose of measuring crime scenes?
  • What is static friction?
  • Which term best describes a temporary motor impairment caused by overstimulation of the nervous system?
  • Which option is NOT listed as a basic element of gun safety?
  • Which statement about nighttime reaction time is correct?
  • What goals do vehicle maintenance accomplish?
  • What are the two categories of stops?
  • Which statement best captures the deadly force standard?
  • Which of the following lists the three components of defensive driving?
  • When is a person most likely to resist?
  • Which statement describes the difference in road friction between dry and wet conditions?
  • What is acceleration?
  • Which of the following is a pressure point usable on the head and neck area?
  • What does material of road surface mean?
  • Fatal accidents are 2.5 times more likely to occur at which time of day?
  • What is the second law of motion?
  • What is a crisscross room entry?
  • What three things must exist for a gun to go off?
  • Which option best represents the correct sequence to recover from a skid?
  • What are the type of room entry techniques?
  • Which option best captures the three elements of basic gun safety?
  • In wet conditions, the essential function of tire tread is to
  • What is ABS braking?
  • Do not overdrive your
  • Which scenario is commonly cited as a legitimate reason to handcuff someone during transport?
  • We measure things so that we can________.
  • Which of the following is NOT one of the three types of friction described?
  • Regarding dying declarations, which statement is correct?
  • Which sequence best reflects proper crime scene response workflow?
  • Which defensive driving component is primarily about scanning for hazards and being prepared to respond?
  • Which of the following is NOT a control principle?
  • What is the most important factor in crime scene photography?
  • Why should you minimize your flashlight use and use it intermittently during building clearing?
  • Which type of friction is associated with rolling motion between a ball and a surface?
  • What is kinetic friction?
  • Hollow point bullets are designed to
  • Which of the following is NOT a defensive driving component?
  • Approximately what percentage of shootings occur within 21 feet?
  • Everything we do should be ______ and pertinent to the case.
  • What does B.A.N.K stand for in reference to firearms safety?
  • Do headlights track the same as front wheels?
  • Which statement best describes the purpose of crime scene response protocols?
  • In tire terminology, what does the phrase 'material of the tire' refer to?
  • Which of the following is a level of resistance?
  • Which pair is identified as the main causes of firearm accidents?
  • What is the main purpose of tire tread?
  • What is pain compliance?
  • Where should you enter a building when searching?
  • What are the only two things a driver can control?
  • What are the 3 types of prints?
  • In the Safety B.A.N.K mnemonic, what does the A stand for?
  • What defines an emergency reload?
  • GSR testing is correct in indicating what?
  • According to the laws of motion, a body at rest will stay at rest unless acted upon by what?
  • What does tire tread refer to?
  • What is friction?
  • Which of the following is the final step in applying pressure points?
  • Photography is
  • How is a criminal crash investigation treated?
  • How is Inertia described within laws of motion?
  • Which of the following is NOT a level of control?
  • What is the most effective baton strike?
  • Which statement best describes crime scene response in investigations?
  • What is a modified button hook room entry?
  • What are the three types of friction?
  • What is the recommended following distance in a non-emergency situation?
  • How far should your reactionary gap be when pursuing a vehicle?
  • What is rolling friction?
  • Kinetic friction is defined as?
  • Another step of sight picture/sight alignment: The front sight should be clear and placed on the target while maintaining the sight picture.
  • Which two steering techniques are mentioned for maintaining control?
  • What is centripetal force?
  • How long does a mental stun last on average?
  • Which room entry technique involves officers on the same side and has the lead officer hooking to the right?
  • Which statement is true about range safety?
  • What is the most conservative use of force theory?
  • GSR stands for what, and how is it described?
  • What are the three components of defensive driving?
  • What is a condition three malfunction?
  • In the Safety B.A.N.K mnemonic, what does the N stand for?
  • Which description about GSR evidence is accurate?
  • During skid recovery, when should brakes be applied?
  • Which pressure point is located on the outside of the thigh?
  • What are examples of temporary evidence?
  • Active protection devices vs passive protection devices are defined as
  • Who benefits from you participating in the fundamentals of safe driving?
  • Who is a safety officer on the gun range?
  • What is the greatest hazard of room clearing?
  • Which statement about firearm residue testing is accurate?
  • Which item is a tangible reference point at a crash scene?
  • In crash investigations, tire shadows are described as what type of evidence?
  • What is the daytime reaction time value?
  • What are your reactionary tactical options?
  • What is a condition one malfunction?
  • What are motor dysfunctions?
  • What is a active occupant Protection device?
  • In a two-vehicle non-central collision, the direction of force of at least one vehicle does not go through the center mass.
  • What percentage of shootings occur within the hours of 1800 to 0600?
  • Which statement describes latent prints?
  • What is defensive driving?
  • If you have 20/20 vision in the day at night your vision is
  • Which of the following is NOT one of the three types of individuals we handcuff?
  • How should you brake with conventional brakes?
  • How do you demobilize a suspect using a flashlight?
  • Which option correctly represents the daytime reaction time value? (alternative wording)
  • What three things must be present to make a gun safe or unsafe?
  • Which of the following is a head or neck pressure point?
  • How long do most shootings last?
  • In the Safety B.A.N.K mnemonic, what does the B stand for?
  • Approximately 85% of shootouts occur at a distance of less than 21 feet between the officer and the suspect.
  • Which approach is recommended to maintain safe coverage during room clearing?
  • In firearm safety, what does the 'K' in B.A.N.K stand for?
  • Double locking handcuffs are primarily used to prevent what?
  • When is it appropriate to use impact weapons?
  • What does the One Plus One Theory state?
  • The three pistol malfunctions?
  • What is friction?
  • What is the first law of motion?
  • Which statement best describes the transfer concept in investigations?
  • Defensive driving is necessary when
  • Which defensive driving component involves maintaining safe following distance and spacing to provide time to react?
  • What is an erroneous identification?
  • Which force acts away from the center in circular motion?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy